- Admin
- #1
- Joined
- May 21, 2021
- Messages
- 2,530
- Reaction score
- 1,496
- Points
- 113
- Location
- Stuart, Florida
- Website
- themikephillipsforum.com
As seen on My Classic Car with Dennis Gage - Bead Hero and Mike Phillips
Dennis Gage was here at our Stuart, Florida shop to shoot some fresh videos including two 30 second TV Commercials. This TV Commercial is about Bead Hero.
30 seconds is not very long to share a lot of information. The thing I would point out in this 30 second TV commercial is notice how I show, spraying Bead Hero onto a folded, microfiber towel, in order to use the 2-Towel Method to apply, level and remove this spray-on ceramic coating.
The most important thing is how I'm spraying AWAY from the car, not spraying towards the car.
Why?
To avoid any accidental overspray onto the car. This spray-on ceramic coating dries hard after about 2-3 days. If you accidently get any fine, atomized droplets onto any surface and don't wipe it off, it will harden.
Thus, anytime you're applying a spray-on ceramic coating, it's a good Best Practice to simply spray away from the car and also use the 2-Towel Method for applying and removing the coating.
Mike
Dennis Gage was here at our Stuart, Florida shop to shoot some fresh videos including two 30 second TV Commercials. This TV Commercial is about Bead Hero.
30 seconds is not very long to share a lot of information. The thing I would point out in this 30 second TV commercial is notice how I show, spraying Bead Hero onto a folded, microfiber towel, in order to use the 2-Towel Method to apply, level and remove this spray-on ceramic coating.
The most important thing is how I'm spraying AWAY from the car, not spraying towards the car.
Why?
To avoid any accidental overspray onto the car. This spray-on ceramic coating dries hard after about 2-3 days. If you accidently get any fine, atomized droplets onto any surface and don't wipe it off, it will harden.
Thus, anytime you're applying a spray-on ceramic coating, it's a good Best Practice to simply spray away from the car and also use the 2-Towel Method for applying and removing the coating.
Mike
Last edited: