Pressure hose fittings question

[mga]

Hey, I want to attach a pressure washer hose to the SPRAY end of a wand, then at the other end, I want to attach one of those drain cleaning tools that blow water backwards. That tool has a 1/4" quick connect male. I plan on cutting the existing fittings off and replacing the ends with one 1/4" make QC and the other 1/4" female QC.

I'm using a lightweight electric pressure washer (1500 lbs) and I want to use this setup to clear out a 3" drain line. My plan was to insert the hose into the pipe as far as it would reach, turn on the PW and use the wand to control the water.

Can someone tell me what fittings I need for this? thanks!

 

[Mike Phillips]

I've never seen anything like this before but I have a friend that's one of those, "Jacks of all Trades" and I'll send him the link to this thread and see if he has a clue?


Mike

 

[mga]

thanks! but I actually found a hose that does exactly what I want . it has a 1/4" QC male at one end to plug into the wand, and a 1/4" QC female end for any type of spray attachment.

I found a 50 foot hose all set up. thanks again for your help, I truly appreciate it.

 

[Mike Phillips]

thanks! but I actually found a hose that does exactly what I want . it has a 1/4" QC male at one end to plug into the wand, and a 1/4" QC female end for any type of spray attachment.

I found a 50 foot hose all set up. thanks again for your help, I truly appreciate it.

That's awesome! Now you can get to work!


Mike