Search results

Ok thanks Mike ! Should I use an interface pad when polishing out? I am dealing with many curves. Don't want to burn through. Nick

I have M 105 and m 205 but I think they are over 6 years old.

Waiting for the clear and color to cure! What a process! I did learn a lot from this project!!! Most of all patience! I now need to polish the over spray out and remove some of the orange peel. Suggestions Mike???? Thanks everyone! Nick

Oh brother, I haven't seen that in years!

thank you it's my first car show the car is work in progress!!!

I am thinking about entering a car into a local show. Is there a checklist someone uses in order to get all the detailing in? When should the process start prior to the event? Thanks, Nick

Getting ready to spray again! I am practicing on a piece of metal to get the feel down !:-)

Thank God For Mike! Wish I could meet you! One more question, how do feather in the new paint so I don't have a hard tape line? Roll the tape so there is sorta a canapé? Spray very light ! Then polish? The issue is the old clear and the color? When I start sanding the color it turns lighter...

Well I ordered a new backing plate. I am wondering if I can take that bolt off pull out the stem/threads and then install the new backing plate. I have had this unit over 10 years! I forget the set up. Help/ suggestions, Thanks Nick

I figured as much, thanks Mike!!!!!

Yes very sensitive area will probably hand sand?

Mike, the sanding discs can I use a rotory or do I need a specific polisher. I Have D.A.s Thanks Nick

Any reviews on this tool???

Almost finished, I need to sand /polish out the new paint line , suggestions? 1500-2000 then polish out???? I will need to patch with some bumper resin To fill the scratch . Spot putty did not adhere. We are getting closer!!! After this is cured I will clear coat w/2k and use a blender.

Well Mike ! You were correct, the paint came out yesterday while I was wiping the area down before putting the clear down. I patched this this with spot putty. I will start sanding today, probably with 1000? I was ticked yesterday! My plan is to go to the auto supply shop and get a can of paint...

Not perfect but from 2-3 feet hard to see the imperfection. I used the rotary at 1000 -1400 rpm. No new paint peel.:-)

Got her polished out! Will wait to do clear coat tomorrow!