Paint correction

[MAXMAX]

Yes very sensitive area will probably hand sand?

 

[Mike Phillips]

Mike, the sanding discs can I use a rotory or do I need a specific polisher. I Have D.A.s
Thanks Nick

When you use a rotary to sand it's no longer callled sanding - it's called grinding.

You should use any short stroke DA polisher and an interface pad. Harbor Freight also has an interface pad.

The HF stuff is all industry standedard 6" - but if you for example, a Porter Cable with a 5" backing plate, just cut the interface and sanding discs to fit or use as they are. It's not rocket science.


Mike

 

[MAXMAX]

I figured as much, thanks Mike!!!!!

 

[MAXMAX]

Getting ready to spray again!
I am practicing on a piece of metal to get the feel down !